HIGH-SPEEd Hardware 
 GALEP-5D
is uncompromisingly designed for speed. The programming algorithms
run on an internal 200 MIPS ARM-9 processor under Embedded Linux.
The processor directly controls the pin drivers via up to 4 FPGAs,
which ensure the perfect adaptation of the components to the programming
algorithms. The FPGAs (user-programmable logic) allow the realization
of State Machines, UARTs etc. and thus support time-critical components
that wouldn't be programmable at all with pure software
solutions. The programming cycle times are extremely short, close
to the specified mimimum times of the components. The internal
128 MB RAM serves as data storage and allows you to transfer the
data only once for programming multiple devices.
240 universal pin drivers
A universal pin
driver circuit especially designed for GALEP guarantees optimal
signal quality for the component to be programmed. Each of the
48 pins carries the following signals:
Logical
high, adjustable between 1.3V ... 5.0V
Logical
input, threshold adjustable between 0.5V … 5.0V
Three
independent programming voltages up to 25V
Ground
Three
switchable resistors for pullup and pulldown
Adjustable
clock rate
The switching
regulators for the programming voltages are controlled by D/A converters
in 100 mV steps. Further D/A converters are used to control the
logic levels (1.3V ... 5.0V) and the input threshold (0.5V … 5.0V).
All voltages are permanently monitored by an independent coprocessor.
A universal
pin driver concept with as many pins as possible reduces the requirements
of adapters and thus
ensures an overall low cost programming system.
Standalone Mode
This feature
is currently in development and will be available in the next months
as a free update. It allows using GALEP-5D in mass production without
a PC!
The programming data can be stored on SD card or
on a local server connected via Ethernet. For programming multiple
components, several GALEP-5D devices can be controlled simultaneously
(cluster- or gang-programming).
In System Programming
The signals
for in-system programming (ISP) can be taken from a separately
available ISP adapter or directly from the 48-pin ZIF socket.
The help system provides information about the wiring of the
target system for all supported components.
Software
GALEP-5D
continues the established concept of the GALEP-32 software. The
program runs under Windows 95, 98, ME, NT4, 2000, XP, and Vista.
it features a comprehensive set of basic functions such as read,
program, compare and delete, along with easy-to-use custom configuration
options for any special functions required by the selected component.
The editor allows a multitude of functions for editing component
contents which can be saved and loaded in binary, intel-hex,
motorola-s or jedec file format. Mass production is supported
by providing statistics functions and serial number generation.
JTAG Support:
Delete, program and verify components with JTAG interface (joint
test action group, IEEE Std. 1149.1 ). The following formats are
supported: SVF-Script in XSVF(Xilinx) format; JAM byte code player
(ALTERA).
The software
is permanently improved for supporting new components. If you need
a certain device that's not yet supported, use our free Device
on Demand Service. Free updates are available on
our website in monthly intervals.
Security
Prior
to each function, GALEP checks the power consumption, correct
positioning, and the contacts of all pins of the selected component.
This prevents accidental damage to the component or the device.
Modules and AdapterS
GALEP-5D
comes with a DIL-48 module and programs all components in DIL
sockets of up to 48 Pins between 300 … 600 MIL (ca. 7,5 … 16
mm) wide, without additional adapters. All GALEP-4 and GALEP-5
adapters can be used with the DIL-48 module of GALEP-5D!
A main advantage
of GALEP-5D is the unique module concept. The DIL Modul cen be
replaced in seconds with a module for a different socket. Modules
for all sockets up to 240 pins are available. This keeps the costs
for the overall system low: F.i. a single QFP-120 GALEP-5D module
replaces all 5 Fujitsu QFP-120-adapters for GALEP-4, and additionally
can program all other devices in the same socket! When frequently
programming components with high pin numbers, a GALEP-5D has quickly
brought in its price.
Technical Specifications
Format:
ca. 118x172x22mm (+7mm socket)
Weight:
ca. 750 g
DIL Module
with 48-pin ZIF
socket
Up to 240
universal pin drivers
Programs
low-voltage components down to 1.3V
Mini USB
2.0 high-speed port
Ethernet
10/100 port
SD memory
card slot
200 MIPS
ARM-9 RISC processor, 128 MB RAM, 8 MB Flash
Up to 4 FPGAs
(50K gates, 64Kb RAM)
3
linear voltage regulators for internal power supply
4
switching regulators for programming voltages
2
linear voltage regulators for logic levels and input threshold
2 Microcontrollers
for internal voltage monitoring
8-channel
D/A converter, 16-channel A/D converter
Embedded
Linux 2.6 inside
Robust aluminium
case
Kit contains
GALEP-5D device
DIL-48
module
Ethernet
& Mini USB cables
AC adaptor
CD with
manual and software
System Requirements
PC or
Laptop with Pentium Processor
Windows
95 / 98 / ME / NT4 / 2000 / XP / Vista
USB 1.0
or USB 2.0 port, or Ethernet port
PrICES
GALEP-5D-60 with 60 Pins ...... EUR 899.-
/ US $ 1349.-
GALEP-5D-120 with 120 Pins .. EUR 1199.- / US $ 1799.-
GALEP-5D-240 with 240 Pins .. EUR 1799.- / US $ 2699.-
Prices without VAT. Guarantee: 24 Months. Zertification: CE,
UL.
|
